Filter

A filter is an indispensable device on the transmission medium pipeline, usually installed on the inlet end of pressure reducing valves, relief valves, constant water level valves, and other equipment such as square filters. The filter is composed of a cylinder, a stainless steel filter screen, a sewage discharge part, a transmission device, and an electrical control part. After the water to be treated passes through the filter cartridge of the filter screen, its impurities are blocked. When cleaning is needed, simply take out the detachable filter cartridge and reinstall it after treatment, making it extremely convenient for use and maintenance.

Heating throttle lever

The throttle sled of the heating furnace adopts an imported fully automatic burner, which is safe, reliable, and easy to operate. It has control and safety protection functions such as program startup, automatic ignition, remote flame monitoring, flameout protection, automatic air to air ratio adjustment, full load proportional automatic adjustment, testing port, gas distribution bag, flame detection, etc.

High pressure and high sulfur resistant water jacket heating furnace

In the cylinder of the water jacket furnace, components such as a fire tube, smoke tube, and oil pan tube are installed, occupying a part of the space of the cylinder. The remaining space is filled with water, but water cannot be filled, which is one-third of the cylinder.

Filter separator

The filter separator is composed of a metal shell internally equipped with a primary filter element (filter coalescence filter element) and a secondary filter element (separation filter element), as well as accessories such as a drain valve, drain valve, differential pressure gauge, safety valve, and heat tracing device. After the jet fuel enters the filter separator, it first collects in an aluminum tray, and then disperses into the coalescence filter element from the inside out. The first step is to filter out solid impurities by the filter layer, the second step is to separate the emulsified oil and water through the demulsification layer, and the third step is to coalesce small water droplets into large water droplets by the coalescence layer, which settle in the collection tank; Then, the small water droplets that accumulate in the future are further separated by the repulsive effect of the separation filter element, and settle in the sedimentation tank, which is discharged by the drainage valve. The clean fuel is collected in the secondary tray through the separation filter element and discharged from the outlet of the filter separator.

300×104Nm3d Dehydration pry

The dehydration skid is a very important point in the natural gas dehydration device, including the drainage tank body and the skid seat body; The drainage tank body is arranged on the pry base body: the pry base body includes a support unit, which is used to tilt the drainage tank body relative to the horizontal plane. The fully automatic dehydration pry of this utility model makes the drainage tank body more stable compared to simple welding, which cannot adapt to the size of the drainage tank body.

Finned tube heat exchanger

Finned tube heat exchanger is one of the earliest and most successful discoveries in the process of improving tube heat exchange. This method is still the most widely used among all the various methods for enhancing heat transfer on tubular heat transfer surfaces. It is not only suitable for single finned tube heat exchangers, but also widely used in power, chemical, petrochemical, air conditioning, and refrigeration engineering.

1150KW testing water jacket heating furnace

In the metallurgical industry, a heating furnace is an equipment (industrial furnace) that heats materials or workpieces (usually metals) to the forging temperature during rolling.

P9.92MPa DN1100Three phase testing separator

A device that separates oil, gas, and water from the formation fluid on the ground and accurately measures their production. It can be divided into three forms: vertical, horizontal, and spherical. For the convenience of transportation, horizontal separators are usually used for production measurement. The typical internal structure of a horizontal three-phase separator mainly includes: inlet splitter, defoamer, coalescing plate, vortex eliminator, mist eliminator, etc.

Combined separator

A device that separates oil, gas, and water from the formation fluid on the ground and accurately measures their production. It can be divided into three forms: vertical, horizontal, and spherical. For the convenience of transportation, horizontal separators are usually used for production measurement. The typical internal structure of a horizontal three-phase separator mainly includes: inlet splitter, defoamer, coalescing plate, vortex eliminator, mist eliminator, etc.

YB27-4Gas Gathering Station 600 × 104Nm3/d production separator

A separator is a machine that separates a mixed substance into two or more different substances. Common separators include centrifugal separators and electrostatic separators.